9.8 As A Mixed Number

9.8 as a fraction

Decimal to Fration Computer / Converter

Catechumen from decimal to fraction. Convert 9.viii to Fraction. Decimal to fraction nautical chart and estimator. Writes any decimal number as a fraction.

How to Convert a Decimal to a Fraction - Steps

Footstep one: Write downwardly the decimal every bit a fraction of one (decimal/1);
Footstep 2: If the decimal is not a whole number, multiply both meridian and bottom by 10 until yous get an interger at the numerator.
Step 3: Simplify (or reduce) the fraction if information technology is not in the simplest grade.

Larn more reading the examples below or use our cocky-explaining figurer above

Catechumen decimal 0.05 to a fraction

0.05 = ¹/_xx as a fraction

Step past Step Solution

To convert the decimal 0.05 to a fraction follow these steps:

Footstep 1: Write downwards the number as a fraction of one:

0.05 = ^0.05/_i

Step two: Multiply both summit and lesser by 10 for every number after the decimal betoken:

As we have two numbers afterward the decimal point, we multiply both numerator and denominator by 100. So,

0.05/1 = ^{(0.05 × 100)}/_{(ane × 100)} = ⁵/₁₀₀.

Stride iii: Simplify (or reduce) the fraction:

⁵/₁₀₀ = ¹/₂₀ when reduced to the simplest course.

What is 0.45 as a fraction?

0.45 = ⁹/₂₀ as a fraction

Step by Step Solution

To convert the decimal 0.45 to a fraction follow these steps:

Footstep 1: Write down the number every bit a fraction of ane:

0.45 = ^0.45/₁

Step 2: Multiply both superlative and bottom by ten for every number later on the decimal point:

Equally we have 2 numbers after the decimal signal, we multiply both numerator and denominator by 100. And then,

0.45/1 = ^{(0.45 × 100)}/_{(1 × 100)} = ⁴⁵/₁₀₀.

Step three: Simplify (or reduce) the fraction:

⁴⁵/₁₀₀ = ^ix/₂₀ when reduced to the simplest form.

Equivalent fraction for 1.3 percent

1.3 = ¹³/_x = 1ⁱⁱⁱ/₁₀ equally a fraction

Step past Step Solution

To convert the decimal 1.3 to a fraction follow these steps:

Footstep 1: Write down the number equally a fraction of one:

i.3 = ^1.3/₁

Step 2: Multiply both top and bottom past ten for every number after the decimal point:

As nosotros accept one numbers after the decimal point, nosotros multiply both numerator and denominator by ten. So,

1.3/1 = ^{(1.3 × x)}/_{(1 × 10)} = ^xiii/₁₀.

(This fraction is alread reduced, We can't reduce information technology any further).

Equally the numerator is greater than the denominator, we have an IMPROPER fraction, so we tin also express information technology as a MIXED NUMBER, thus 13/₁₀ is also equal to 1 ³/₁₀ when expressed as a mixed number.

Conversion table: fraction to decimal inches and millimeter equivalence

To convert fractions to decimals and millimeters and vice-versa use this formula:

1 inch = 25.4 mm exactly, then ...

To convert from inch to millimeter multiply inch value past 25.four.

To convert from millimeter inch divide millimeter value past 25.four.

An easier way to do information technology is to utilise the table below. How?

Case i

Convert 1 one/32" to mm:
Notice i 1/32 and read to the correct nether mm column! You will find 26.1938.

Example 2

Convert 0.875 decimal inches to inches (fraction form).
Look down the decimal column until you find 0.875, then read to the left to find 7/8 inches or move to the right cavalcade to detect the mm value!

Usable fraction to decimal inches and millimeter conversion table

fraction	inches	mm
1/64	0.0156	0.3969
1/32	0.0313	0.7938
3/64	0.0469	ane.1906
i/sixteen	0.0625	1.5875
5/64	0.0781	1.9844
3/32	0.0938	two.3813
7/64	0.1094	2.7781
ane/eight	0.1250	3.1750
9/64	0.1406	three.5719
5/32	0.1563	3.9688
11/64	0.1719	4.3656
iii/16	0.1875	4.7625
13/64	0.2031	5.1594
7/32	0.2188	five.5563
15/64	0.2344	v.9531
1/four	0.2500	half dozen.3500
17/64	0.2656	vi.7469
9/32	0.2813	seven.1438
19/64	0.2969	vii.5406
5/sixteen	0.3125	7.9375
21/64	0.3281	8.3344
11/32	0.3438	eight.7313
23/64	0.3594	nine.1281
3/viii	0.3750	9.5250
25/64	0.3906	9.9219
13/32	0.4063	10.3188
27/64	0.4219	10.7156
7/16	0.4375	11.1125
29/64	0.4531	11.5094
15/32	0.4688	11.9063
31/64	0.4844	12.3031
1/2	0.5000	12.7000
33/64	0.5156	thirteen.0969
17/32	0.5313	13.4938
35/64	0.5469	13.8906
ix/16	0.5625	14.2875
37/64	0.5781	14.6844
19/32	0.5938	15.0813
39/64	0.6094	15.4781
5/8	0.6250	fifteen.8750
41/64	0.6406	16.2719
21/32	0.6563	16.6688
43/64	0.6719	17.0656
11/xvi	0.6875	17.4625
45/64	0.7031	17.8594
23/32	0.7188	18.2563
47/64	0.7344	18.6531
iii/4	0.7500	19.0500
49/64	0.7656	19.4469
25/32	0.7813	nineteen.8438
51/64	0.7969	20.2406
thirteen/16	0.8125	twenty.6375
53/64	0.8281	21.0344
27/32	0.8438	21.4313
55/64	0.8594	21.8281
7/8	0.8750	22.2250
57/64	0.8906	22.6219
29/32	0.9063	23.0188
59/64	0.9219	23.4156
xv/xvi	0.9375	23.8125
61/64	0.9531	24.2094
31/32	0.9688	24.6063
63/64	0.9844	25.0031
1	1.0000	25.4000

fraction	inches	mm
1 1/64	i.0156	25.7969
1 1/32	ane.0313	26.1938
1 3/64	1.0469	26.5906
1 1/16	i.0625	26.9875
ane 5/64	1.0781	27.3844
i 3/32	1.0938	27.7813
ane 7/64	1.1094	28.1781
1 1/viii	1.1250	28.5750
1 nine/64	1.1406	28.9719
i 5/32	1.1563	29.3688
1 11/64	1.1719	29.7656
1 3/xvi	ane.1875	30.1625
i 13/64	1.2031	30.5594
1 seven/32	1.2188	xxx.9563
i 15/64	1.2344	31.3531
one 1/four	one.2500	31.7500
1 17/64	1.2656	32.1469
1 9/32	1.2813	32.5438
one 19/64	1.2969	32.9406
i v/sixteen	1.3125	33.3375
one 21/64	1.3281	33.7344
one 11/32	1.3438	34.1313
i 23/64	ane.3594	34.5281
ane 3/eight	1.3750	34.9250
1 25/64	1.3906	35.3219
1 thirteen/32	i.4063	35.7188
1 27/64	1.4219	36.1156
one 7/16	1.4375	36.5125
ane 29/64	i.4531	36.9094
one xv/32	1.4688	37.3063
i 31/64	i.4844	37.7031
one 1/2	i.5000	38.thousand
1 33/64	1.5156	38.4969
1 17/32	1.5313	38.8938
1 35/64	1.5469	39.2906
1 9/16	1.5625	39.6875
1 37/64	ane.5781	40.0844
1 nineteen/32	1.5938	40.4813
i 39/64	1.6094	xl.8781
1 5/8	1.6250	41.2750
1 41/64	1.6406	41.6719
1 21/32	1.6563	42.0688
i 43/64	i.6719	42.4656
1 11/sixteen	i.6875	42.8625
1 45/64	one.7031	43.2594
one 23/32	1.7188	43.6563
one 47/64	1.7344	44.0531
1 iii/4	1.7500	44.4500
1 49/64	1.7656	44.8469
1 25/32	ane.7813	45.2438
one 51/64	1.7969	45.6406
1 13/16	ane.8125	46.0375
1 53/64	1.8281	46.4344
1 27/32	one.8438	46.8313
1 55/64	1.8594	47.2281
ane 7/8	1.8750	47.6250
i 57/64	i.8906	48.0219
1 29/32	one.9063	48.4188
1 59/64	1.9219	48.8156
1 15/16	1.9375	49.2125
one 61/64	1.9531	49.6094
ane 31/32	i.9688	50.0063
1 63/64	1.9844	50.4031
two	2.0000	50.8000

fraction	inches	mm
2 ane/64	two.0156	51.1969
2 1/32	2.0313	51.5938
2 3/64	2.0469	51.9906
two one/xvi	2.0625	52.3875
2 v/64	2.0781	52.7844
two three/32	ii.0938	53.1813
2 7/64	2.1094	53.5781
two 1/eight	two.1250	53.9750
ii 9/64	ii.1406	54.3719
ii 5/32	ii.1563	54.7688
two xi/64	2.1719	55.1656
two 3/16	ii.1875	55.5625
ii 13/64	2.2031	55.9594
2 7/32	2.2188	56.3563
two 15/64	2.2344	56.7531
2 1/4	2.2500	57.1500
2 17/64	2.2656	57.5469
2 ix/32	2.2813	57.9438
2 xix/64	2.2969	58.3406
2 5/16	2.3125	58.7375
2 21/64	ii.3281	59.1344
2 11/32	2.3438	59.5313
2 23/64	ii.3594	59.9281
2 3/8	two.3750	lx.3250
2 25/64	ii.3906	sixty.7219
ii 13/32	ii.4063	61.1188
two 27/64	two.4219	61.5156
2 7/xvi	ii.4375	61.9125
ii 29/64	2.4531	62.3094
2 15/32	2.4688	62.7063
2 31/64	2.4844	63.1031
2 ane/two	2.5000	63.5000
2 33/64	two.5156	63.8969
2 17/32	2.5313	64.2938
two 35/64	two.5469	64.6906
2 ix/sixteen	2.5625	65.0875
2 37/64	2.5781	65.4844
2 nineteen/32	ii.5938	65.8813
2 39/64	2.6094	66.2781
2 v/8	two.6250	66.6750
ii 41/64	two.6406	67.0719
2 21/32	ii.6563	67.4688
ii 43/64	2.6719	67.8656
2 eleven/16	2.6875	68.2625
two 45/64	ii.7031	68.6594
2 23/32	2.7188	69.0563
2 47/64	ii.7344	69.4531
2 3/iv	two.7500	69.8500
2 49/64	2.7656	lxx.2469
2 25/32	2.7813	lxx.6438
2 51/64	two.7969	71.0406
2 13/16	ii.8125	71.4375
2 53/64	2.8281	71.8344
ii 27/32	2.8438	72.2313
ii 55/64	ii.8594	72.6281
2 7/eight	2.8750	73.0250
2 57/64	ii.8906	73.4219
ii 29/32	2.9063	73.8188
2 59/64	2.9219	74.2156
two 15/sixteen	2.9375	74.6125
2 61/64	two.9531	75.0094
2 31/32	2.9688	75.4063
2 63/64	2.9844	75.8031
iii	3.0000	76.2000